Garbage Disposal Repair and Installation

A garbage disposal that stops working in the middle of kitchen use, or that begins leaking into the cabinet below the sink, creates an immediate disruption to daily household function. Felton Plumbing Pros handles garbage disposal repair and garbage disposal installation for kitchens throughout the area, from a simple jam in a unit that is otherwise sound to a full replacement of an original disposal that has finally reached the end of its practical life.

Common Problems We Fix

• The disposal hums when the switch is flipped but nothing grinds or rotates, which indicates a jam
• A garbage disposal jammed by a hard object like a bone, pit, or small utensil dropped in accidentally
• The unit trips its reset button repeatedly, even after the jam has been cleared and the button pressed
• Water dripping from the bottom of the disposal housing, pointing to a failed internal seal
• The unit does not respond at all to the switch, not even a hum, suggesting a power or motor failure
• A persistent sour or sewage smell from the sink area that has not improved despite cleaning the unit
• The disposal drains very slowly and backs water into the sink while it runs

When a disposal is jammed, we cut power before any manual work begins, use the appropriate hex key from below the unit to free the grinding plate, and inspect the grinding components for damage from whatever caused the jam before restoring power and testing. When a failed internal seal or burned motor makes repair impractical, we help homeowners select a replacement unit matched to their drain configuration and kitchen usage level, and we install it with proper flange seating, sealed drain connections, and verified electrical function before considering the job complete.

Gas Line Services

Gas line work in Felton covers a range of services, from repairing a corroded section of existing supply pipe to running a new gas line installation for a stove being added to a kitchen that previously ran on electric appliances. We also handle gas connections for dryers, outdoor fire features, and gas supply lines serving water heaters and furnaces throughout the area.

Common Problems We Fix

• A gas appliance that will not ignite reliably despite normal supply being confirmed at the meter
• A faint rotten egg or sulfur smell near an appliance, supply line, or connector that warrants inspection
• A visibly corroded or physically damaged section of gas supply pipe needing replacement
• A gas shutoff valve that is seized, corroded, or no longer operates when turned
• A new stove, dryer, or outdoor appliance needing a dedicated gas line run from an existing connection
• Inconsistent or low gas pressure at an appliance that suggests a supply line restriction

If you smell gas or suspect a gas leak, go outside immediately and call 911 – this is a serious emergency that needs urgent attention from the gas company.

For non-emergency gas line work, we size the supply line correctly for the appliance’s actual BTU demand, install with proper shutoff valves and connectors, and pressure test every connection in the affected section before any appliance is reconnected. Some older Felton homes still have original flexible gas connectors installed decades ago that are worth inspecting for age-related deterioration, and we flag those whenever we encounter them during any gas line service call.

Emergency Plumbing and 24 Hour Service

Plumbing emergencies in Felton do not happen on a convenient schedule, and the mountain location means that waiting until morning is not always a realistic option when water is actively damaging a home’s structure. Felton Plumbing Pros operates as a true emergency plumber and 24 hour plumber for homeowners throughout Felton and surrounding communities including Ben Lomond, Boulder Creek, Mount Hermon, and Scotts Valley.

Common Problems We Fix

• A burst pipe releasing water actively into a wall cavity, crawlspace, or living area
• A main sewer line backup with sewage rising into the lowest fixtures in the home
• A water heater flooding its utility area with no way to stop the flow short of a full household shutoff
• A ceiling or wall that is actively dripping or soaking from a pipe leak above it
• A complete loss of water service throughout the entire home with no known cause
• A toilet that has overflowed and continues to release water despite the supply valve being closed
• Active flooding from a failed pipe connection in a crawlspace or utility area

When an emergency call comes in, we dispatch quickly and arrive prepared to work rather than simply assess. The first action on any emergency is confirming the most effective shutoff to stop active damage, and we walk homeowners through that on the phone when we reach them before arrival. How to stop an emergency water leak always starts with identifying the right valve, and we provide that guidance immediately while we are in transit. A fast response plumber who addresses emergencies completely does not patch what is visible and leave. We find the cause, make a proper repair, and confirm the system is stable before we go.

Slab Leak Detection and Repair

A slab leak is one of the most damaging plumbing failures a homeowner can face because it is also one of the least visible. In Felton and the broader San Lorenzo Valley, older properties built on conventional concrete slabs with copper supply lines underneath are showing increasing signs of pinhole corrosion from age and local water conditions. By the time a water bill spike or a warm floor section prompts a call, moisture may have been collecting in and beneath the slab for weeks.

Common Problems We Fix

• A consistently warm area on a tile or concrete floor with no radiant heating system installed
• The sound of running water somewhere below the floor when every fixture in the house is confirmed off
• An unexplained monthly water bill increase over several billing periods with no visible indoor source
• Cracks appearing in the floor, baseboards, or lower wall sections with no obvious cause
• Persistent moisture or mold at the base of an interior wall near the edge of the slab
• A supply system pressure test showing measurable pressure loss at rest with all valves closed

Slab leak detection starts with a pressure test to confirm active leakage, then electronic acoustic detection to narrow the source location before any concrete is disturbed. Once the location is identified as precisely as possible, we walk through the repair options, including direct slab access, line rerouting through a wall to bypass the damaged section, or full repiping when the under-slab line condition suggests the failure is part of a broader deterioration pattern. We explain each option clearly before any work begins so homeowners can make an informed decision.

Why Felton Homeowners Choose Felton Plumbing Pros

We Know Felton and the San Lorenzo Valley

Working as a local plumber in Felton means understanding the specific conditions that shape plumbing problems here in ways that a plumber unfamiliar with the area cannot replicate. We know that properties along the river corridor deal with aggressive root intrusion in sewer laterals from the surrounding redwood and oak canopy. We know that older homes in the valley floor neighborhoods have galvanized supply lines that are at or past the end of their practical life. We know that hillside properties sometimes have service line configurations that reflect the terrain rather than a standard flat lot installation. That local familiarity shortens our diagnostic time and produces more accurate first-visit recommendations than someone working from a general service playbook.

We Diagnose the Root Cause, Not Just the Symptom

A drain that is snaked and clears temporarily but backs up again two weeks later has not been repaired. It has been managed for two weeks. When we get a call about a kitchen sink drain that keeps backing up in a Felton home, we want to know why it keeps backing up, not just how to clear it once more. Running a camera and finding a grease-coated drain line section takes more time than snaking and leaving, but it produces an actual solution rather than a repeat call. A homeowner in Ben Lomond had used two other plumbing companies for the same recurring kitchen backup over eighteen months before calling us. We identified a section of cast iron drain pipe with significant grease accumulation that had never been fully treated, hydro-jetted it completely, and that was the last call for that drain.

We Respect Your Home and Communicate Clearly

Working in a finished home requires habits that not every plumber brings consistently. We wear shoe covers in living areas, protect surfaces during work in tight spaces, contain water and debris rather than letting it spread, and clean up before we leave. We also communicate with homeowners throughout every job, explaining what we are finding as we go rather than disappearing for an hour and then presenting a completed repair without context. In communities like Felton and Mount Hermon where homeowners often have to arrange to be away from work for a service appointment, the combination of respectful work habits and clear communication is something people genuinely notice and remember.

We Work Confidently on Modern Systems Including Tankless Water Heaters

The homes we service throughout Felton and the surrounding valley range from original mountain cabins with aging infrastructure to renovated properties with tankless water heaters, high-efficiency fixtures, and modern pressure systems. Working on both ends of that spectrum requires actual technical range, not just familiarity with one era of construction. We install and service tankless water heater systems regularly, handle annual descaling maintenance for well-water properties where mineral buildup in heat exchangers happens faster, and diagnose electronic control and sensor failures that older-style diagnostic approaches would miss. A homeowner in Scotts Valley called us about a tankless unit that had been producing an error code and intermittent cold water for three weeks. We identified a partially blocked flow sensor, cleaned it, and the unit has performed correctly every day since.

Dependable Scheduling and Fast Emergency Response

When a Felton homeowner schedules a service call, we hold to it. We communicate proactively if anything changes, and we do not leave people waiting without an update. For emergencies, we move quickly. We are a local plumbing company in the actual sense, based in this area, familiar with the roads, and not routing calls through a regional dispatch center that has no specific knowledge of the valley. A same day plumber who shows up prepared and on time in a mountain community during an emergency is a fundamentally different experience from a regional company that promises availability and delivers a four-hour window with no updates. We have received calls from homeowners in Boulder Creek at 10 PM with active pipe failures, and we have arrived and resolved them the same night.

Our Service Process

1. You Reach Out

Contact us today and tell us what you are dealing with, where the property is located, and whether the situation is urgent. For emergencies, let us know directly and we treat the call accordingly from the first moment. We ask a few straightforward questions so we can dispatch the right person with the right equipment for the specific problem rather than sending a generalist who needs a return trip for parts.

2. We Schedule Service

For non-emergency work, we confirm a service window that fits your schedule and give you a realistic arrival time rather than an indefinitely vague range. For emergency calls, we provide an estimated arrival time and stay in contact while in transit. We communicate proactively when anything on our end changes rather than leaving you wondering.

3. Diagnosis and Clear Explanation

When we arrive, we assess the problem fully before recommending any work. We explain what we found, what caused it, what is needed to fix it, and what your options are in plain language that does not require a plumbing background to follow. We also note anything else we observe during the assessment that may need attention in the coming months, so you are not surprised by a related problem shortly after the current one is resolved.

4. Repair and Final Checks

We complete the work and test everything before we pack up. Pipe repairs are pressure tested. Drain work is confirmed to flow freely before we leave. Fixture and appliance installations are fully tested through a complete operating cycle. We clean up the work area and walk you through what was done and why before we go, so you have a clear picture of the current state of your plumbing.

Service Area in and Around Felton, California

Felton Plumbing Pros serves homeowners and property managers throughout Felton and the communities of the greater San Lorenzo Valley and Central Coast. We are familiar with the roads, the properties, and the specific plumbing conditions across this entire area, and we work in all of it on a regular basis.

• Felton
• Ben Lomond
• Boulder Creek
• Mount Hermon
• Scotts Valley
• Santa Cruz
• Soquel
• Capitola
• Aptos
• Zayante
• Lompico
• Brookdale

Being a truly local plumbing company in Felton means that when you call us, you are not reaching a regional call center that is going to assign whoever is closest based on a service radius calculation. You are reaching a team that has driven every road in this valley, worked in homes like yours in neighborhoods like yours, and has the specific local knowledge to respond effectively at any hour. That matters for a scheduled water heater replacement and it matters even more at 11 PM when a pipe has burst.

Professional Plumbing Repair vs DIY Attempts

Home improvement content online makes plumbing repairs look more approachable than they typically are, and while some tasks are genuinely within reach for a careful and mechanically inclined homeowner, the line between a safe DIY repair and one that creates a larger and more expensive problem is closer than most tutorials acknowledge.

Electricity is the most immediately dangerous factor in plumbing DIY work. Electric water heaters operate on 240-volt circuits with enough current to cause a fatal injury if the power is not fully isolated before internal components are touched. Confirming a breaker is off is not the same as confirming the circuit is dead at the unit. A homeowner working on an electric water heater who has not properly verified the power is off at the appliance, not just at the panel, is working in close proximity to a live high-voltage circuit in a wet environment. That combination of factors creates a risk that has no margin for error.

Gas line work carries its own distinct category of risk. Any repair or installation on a gas supply line requires the right fittings, proper technique, and a pressure test of every connection before an appliance is reconnected. A fitting that is not fully sealed after a DIY gas line installation can allow flammable gas to accumulate slowly in an enclosed utility space without producing an immediately detectable smell. The absence of a visible problem does not confirm the absence of a real one. Gas line installation for any appliance should be handled by someone who has the knowledge and equipment to verify the completed work is safe.

Leaking pipes inside walls are a common source of DIY damage compounding. A homeowner who opens a wall, patches a leaking joint imprecisely, and closes the wall back up may create a repair that holds for a few weeks under low flow conditions and then fails again under normal demand. By the second failure, the framing, insulation, and drywall in that wall cavity have absorbed significantly more moisture than the original leak alone would have caused. In older Felton homes where wall cavities may have already seen some moisture history from past events, additional exposure can accelerate wood deterioration and create conditions for mold growth.

Modern plumbing components also have failure modes that require specific knowledge to diagnose correctly. A tankless water heater that is not producing consistent hot water has several possible causes, including a blocked flow sensor, a scaled heat exchanger, a venting restriction, or a failing control board. Replacing the wrong component wastes money and leaves the original problem in place. Thermostatic mixing valves, pressure-balancing shower valves, and electronic fill controls all have their own specific failure patterns that respond to targeted diagnosis, not generic component swapping. The total cost of professional service on a plumbing problem is almost always less than the total cost of a DIY attempt that partially fails and then requires a professional repair anyway, plus remediation of whatever damage accumulated in between. Reach out to us for assistance before attempting any repair involving gas, electricity, or wall access.

Frequently Asked Questions

Emergency plumber in Felton?

Yes. Felton Plumbing Pros provides emergency plumbing service throughout Felton and surrounding communities including Ben Lomond, Boulder Creek, Mount Hermon, and Scotts Valley. We respond to burst pipes, sewer backups, water heater failures, flooding, and all other urgent plumbing situations at any hour including nights, weekends, and holidays. Contact us today and describe what is happening so we can dispatch appropriately and provide immediate guidance while we are in transit.

Same day plumber in Felton?

Yes. We offer same day plumber service throughout Felton and the surrounding San Lorenzo Valley for both emergency situations and urgent non-emergency repairs. Whether you need a drain cleared today, a leaking pipe addressed, a water heater assessed, or any other issue handled without waiting until next week, contact us and we will confirm same day availability and schedule you as quickly as possible. Reaching out early in the day gives you the best chance of same day service for non-emergency work.

How soon can you come for a plumbing repair?

For genuine plumbing emergencies with active water damage or a potential gas concern, we prioritize dispatch and aim to arrive as quickly as road conditions allow throughout Felton and the valley. For urgent non-emergency repairs, we typically have same day or next morning availability. For routine scheduled service, we work around your schedule and hold to the windows we commit to. Contact us and tell us the urgency level so we can give you an accurate response timeline.

Do you work on older homes in Felton?

Yes, and this is a core part of what we do every day. Many properties throughout Felton, Ben Lomond, and Boulder Creek were originally built as seasonal mountain homes and converted to year-round residences over time, producing plumbing configurations that reflect decades of incremental change rather than a consistent original design. We are experienced with the pipe materials, drain layouts, and fixture types common to different eras of mountain valley construction, and we come to every job prepared for the variables that older properties regularly produce.

What plumbing services do you offer?

We provide full residential plumbing services including drain cleaning and hydro jetting, water heater repair and installation, tankless water heater service, pipe repair and whole-home repiping, water line repair and replacement, main water line repair, slab leak detection and repair, toilet repair, faucet repair, shower repair and shower valve replacement, fixture installation, garbage disposal repair and installation, gas line repair and installation, emergency gas plumber response, home plumbing inspection, and 24 hour emergency plumbing throughout Felton and surrounding communities.

Do you handle tankless water heaters?

Yes. We install, service, and repair tankless water heater systems from major manufacturers throughout the Felton area. This includes new installations for homes switching from conventional tank units, diagnostic and repair work on existing tankless systems, and annual maintenance including heat exchanger descaling, which is particularly important for well-water properties in and around Felton where mineral content is higher than city supply areas. If your tankless unit is producing error codes, inconsistent temperature, or no hot water at all, we will diagnose it correctly on the first visit.

Why is my water pressure low?

Low water pressure in a Felton home typically comes from one of a few sources. A failed or worn pressure regulator on the main supply line is the most common cause of whole-house pressure drops and is a straightforward replacement when it is identified as the source. Corroded galvanized supply lines that have narrowed from decades of internal scale accumulation are the next most common cause in older valley homes. A partially closed shutoff valve, a clogged aerator, a leak somewhere in the supply system, or a service line problem can also contribute. We locate the actual source before recommending any work.

What should I do before the plumber arrives?

For an active leak, locate and close the nearest supply shutoff if you can do so safely to stop ongoing water entry into the structure. For a full main line failure, close the main shutoff at the meter or foundation entry point. Avoid using any electrical switches or outlets in areas where water is present or where a wet ceiling is dripping near wiring. For a potential gas concern, do not attempt to locate or address it yourself. If you smell gas or suspect a gas leak, go outside immediately and call 911 – this is a serious emergency that needs urgent attention from the gas company. For a non-emergency appointment, clear access to the work area and locate your main shutoff so you can point us to it quickly.

What causes banging or hammering sounds from pipes in the walls?

Pipe banging or water hammer in Felton homes is typically caused by fast-closing solenoid valves in washing machines or dishwashers creating a pressure shock wave in the supply lines when they close abruptly. Loose pipe hangers that allow a line to shift when flow starts or stops can amplify the sound significantly. High supply pressure is another common contributor. We locate the source, check the pressure at the main regulator, secure any loose hangers, and install water hammer arrestors at the relevant connection points to eliminate the problem at its cause.

Do you serve well-water properties in the Felton area?

Yes. A number of properties throughout Felton and the surrounding mountain communities draw from private wells rather than municipal supply lines, and this creates specific plumbing considerations including different mineral content, varying water quality characteristics, and the absence of the municipal pressure and filtration systems that city-connected homes rely on. We work on well-water properties throughout the area and account for those differences in our diagnostic and maintenance recommendations, particularly for water heater maintenance intervals and fixture wear assessments.

Is a plumber near me available for slab leak detection in Felton?

Yes. We provide slab leak detection and repair throughout Felton and surrounding communities. Our process uses pressure testing to confirm active leakage and electronic acoustic detection to locate the source beneath the slab as precisely as possible before any concrete work is considered. Once the location is identified, we explain the repair options clearly, including direct access repair, line rerouting through walls to bypass the damaged slab section, or whole-home repiping when the overall pipe condition warrants a more comprehensive solution.

Do you handle plumbing inspections for Felton properties?

Yes. A home plumbing inspection on an older Felton or San Lorenzo Valley property is a service we provide for current homeowners who want to understand the current condition of their system and for buyers seeking an independent assessment before completing a purchase. We inspect supply line materials and condition, drain and vent function, water heater age and performance, fixture operation, shutoff valve function, and any visible evidence of past leaks or deferred maintenance. We give you a clear and honest summary of what we find and what, if anything, needs attention in the near term.

Felton’s Local Plumbing Company, Ready Whenever You Need Us

Felton Plumbing Pros provides the full range of residential plumbing services to homeowners throughout Felton, Ben Lomond, Boulder Creek, Mount Hermon, Scotts Valley, and surrounding communities in the San Lorenzo Valley and along the Central Coast. From a routine faucet repair to a whole-home repipe of a property that started its life as a mountain cabin, we bring the same level of diagnostic care, clean work habits, and honest communication to every job. We know this valley, we know the homes in it, and we know the specific plumbing conditions that make working here different from working in a flat suburban neighborhood.

Contact us today to schedule service or to talk through what you are dealing with. We are ready to help.

Zip codes we serve: 95018, 95005, 95006, 95007, 95041, 95017, 95060, 95062, 95064, 95065, 95066, 95003, 95010, 95073